= Using the FFADO mixer = ''The ffadomixer provides access to the mixing/routing facilities of your !FireWire audio hardware, and allows you to set parameters such as phantom power, sampling rate etc.'' == Generic mixer information == To start the mixer, issue the command {{{ $ ffado-mixer & }}} If you see a message like {{{ =========================================================== ERROR: Could not communicate with the FFADO DBus service... =========================================================== }}} you need to [wiki:DbusServer start your DBUS server] first. The mixer has a graphical user interface and will not run without X11 (i.e. you can't use it during in console sessions). {{{ #!LegendBox #!legend: Note On some devices (notably the Focusrite range of producs), most mixer functions only work when the hardware is in ''streaming mode''. That means ffadomixer won't do much unless JACK is running. }}} == Hardware-specific mixer information == ''Please contribute to this section by adding subpages for your own hardware. Try to filter out generic information and put them in the section above.'' * Edirol * [wiki:FfadoMixer/EdirolFA101 FA 101] * [wiki:FfadoMixer/EdirolFA66 FA 66] * Focusrite * [wiki:FfadoMixer/FocusriteSaffireLE Saffire LE] * [wiki:FfadoMixer/FocusriteSaffirePro10 Saffire Pro 10] * [wiki:FfadoMixer/FocusriteSaffirePro26 Saffire Pro 26]